 |
Automatic
Foundation vents
Helps remove
moisture that can lead to damp rot and eventually
costly damage, as well as attract termites.
Automatic Foundation Vents take the worry out of
remembering to open and close vents as the weather
changes, so the home can be protected from decay.
The vent has a bi-metal coil to open and close
automatically without electricity. When the
temperature reaches 70°F the vent is fully opened to
provide fresh intake air, and fully closes at
approximately 40°F to conserve energy and protect
pipes. These vents are easily installed using
screws, or screw anchors or with retaining clips.
Both are included with the vents. No mortar is
required for installation. Available in black,
brown, and gray.
Sizing
Foundation Vents |
 |
Powered
Foundation vents
Help remove
moisture that can lead to damp rot and eventually
costly damage, as well as attract termites.
Powered foundation vents are extremely effective in
providing ventilation for moisture control.
A small fan is encased in the housing of the vent
and runs continuously at a low speed. The fan
creates negative pressure in the foundation to pull
air through the foundation. Powered vents are
installed on one side of the foundation, with open,
non-powered vents on the other side. 11,160 cubic
feet/hour. Available in Black, Brown and Gray
Sizing
Foundation Vents |
 |
Oval
Aluminum Vent Cover / Ledge
22 1/2' X 14
1/2' X 4 1/2'
|
 |
Vent Cover
(Rectangle)
12 1/4 X 25
|
 |
Vent Cover
(Rectangle)
11 1/4 X 20
1/4
|
|
Sorry no picture available.
|
Oval
Aluminum Vent Cover
22 1/2' X 14
1/2'
|
|
Sorry no picture available. |
Galvanized
Foundation Vent
Sizing
Foundation Vents |