Home  |  Products  |  Technical Information  |  Customer Support  |  Idea Gallery  |  About Acme  |  What's New  |  Locations  |  Contact

 

Masonry Products - Chimney Products   Enhance Your Curb Appeal!

 

Mortar

Polymeric Sand

Masonry Cleaners

Tools

Anchors & Wall ties

Sealers

Waterproofers

Trench Drain

Lintels

Chimney Products

Vents

Steel Products

Raw Materials

 

 

 

Chimney Products

Clay Thimbles

Round non-load bearing fired clay unit normally used to connect the chimney connector from an appliance through the wall of the chimney to the flue. 6x6, 6x9, 6x12, 6x15, 6x18, 6x24, 8x6, 8x9, 8x12, 8x15, 8x18, 8x24

 

Clay Flue Liners

Tubular non-load bearing fired clay unit, normally used for conveying hot gases in chimneys. Liners are 2 foot long and come in a variety of sizes 8x8, 8x13, 13x13, 18x18, 24x24, 13x18, 8X18

 

Clay Flue Liner with Hole

Tubular non-load bearing fired clay unit with hole for thimble, normally used for conveying hot gases in chimneys. 8x8, 8x13, 13x13

 

 

Flue Block with Half Hole

 

 

Flue Block

 

 

Cleanout Door
Doors made of long lasting cast iron have much more resistance than steel doors to the acidic condition found in ashes and to the elements. 8” x 8”

 

Cast Iron Ash Dumps
Is a pivoted metal door located flush with the hearth surface through which ashes are dropped into the ashpit below. The ash dump is exposed to the heat from the fire. It is a known fact that cast iron has much more resistance to heat than steel. For permanence the ash dump should be made of cast iron
. 4 1/2" x 9"

 Fireplace Throat Dampers

Cast iron fireplace damper is used in masonry fireplaces during new construction or to replace an existing warped or rusted damper. Includes housing and door. All models are 6" height.

CHIMNEY COVER

Protects internal fireplace and chimney from deterioration. Keeps out rain, birds, animals and debris and moisture. Black powder coated galvanized steel. 13x13 and 18x18

 

 

Fire Clay

Fireclay mortar is used when building ovens or fireplaces with firebrick.

Mix using the following or similar formula:
1 part Portland cement
4 1/2 parts Sand
1/2 part Fireclay
Fire clay is available in 50 lb bags.

Heat Stop
Water soluble and ready to use as a regular refractory cement.  Available in 15 lb can or 50 lb pail.